Bow and Arrow With Quiver Hand Drawing

Download Article

Download Article

If you already know how to do everything with a bow and arrow thanks to other links on this site and yet you still cannot make a container for your arrows (otherwise known as a quiver), then read on. You'll be toting your arrows around in no time.

Steps Download Article

1. 1

   Find some sort of fabric for your quiver, such as a piece of leather, an old shirt, or even an old blanket.

2. 2

   Flatten out your fabric and fold it at the bottom and up the sides, leaving only the top part open.

   Advertisement

3. 3

   Sew the two sides together and the bottom separate so that your arrows will not fall out.

4. 4

   Get some sort of string to use with the quiver (one really long string or two different, shorter strings).

5. 5

   Put a slit into the quiver in the middle and the bottom (the slit in the bottom is optional; it is just so the quiver will not slide on your shoulder). Pull the string through the middle slit first and then the bottom; make sure the two ends are on different parts of the quiver (if this doesn't make sense now, don't worry; it will later on).

6. 6

   Put it on your back (on your right shoulder if you are right-handed and vice versa). At this point you should have one string dangling behind you and the other one with each end of the string in each hand. You should have the ends positioned at your diaphragm.

7. 7

   Tie the two ends together like you would tie your shoes, then take the other string and tie those ends together around your waist.

   Advertisement

Add New Question

• Question

  How long does the leather have to be?

  

  I would say as long as you'd like it to be, but make sure to first measure your arrows, to make sure they will fit. Also take into consideration your height, because you might need to make it longer to fit your proportions. Most quivers are somewhere between 20-30 inches long though.

• Question

  What materials can I use to make a quiver?

  

  You can make yours from leather. Leather can be purchased from most fabric stores.

• Question

  Would PVC work to make a quiver?

  

  It wouldn't be very attractive, but it definitely would work and would be lightweight to carry around. You could drill holes in each end to attach the strap and then glue a PVC cap to one end to hold the arrows inside.

• Question

  What can I use instead of sewing?

  

  Hot glue might work as a temporary solution, but if you want your quiver to last you should probably sew it shut.

• Question

  Can I make a quiver out of a skirt?

  

  You can try, but I don't think it will work because a skirt is likely too soft, so it probably won't hold its shape. Something harder like leather would be a better choice.

• Question

  Where exactly on my back should a bow and arrow quiver be?

  

  It should start at your right hip and go diagonally across to your left shoulder (or vise versa), depending on your dominant hand.

• Question

  What material do I use to make a quiver in the wild?

  

  If there are rushes near, then you can weave them together and sew it shut with more rushes.

• Question

  Can I decorate my quiver?

  

  Yes. It's yours, so do you can do whatever you want.

• Question

  Can the quiver be made from bark?

  

  Yes, you can use bark to make the quiver as long as you ensure that it is sturdy bark.

• Question

  Can I make it from wood?

  

  You can, but it would be very complicated to carve it and heavy when you carry it around.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• If you want your quiver to last a long time, try to use leather.

• Make sure your arrows go into the quiver head first, leaving the side with the feathers about two inches away from the top of the quiver.

• Get a strong, weather(water,heat sun,ect.) resistant part,Like a large PVC pipe section or even cardboard and then hot glue a fabric or leather piece to the outside. This results in a stronger quiver that lasts longer and is better than a simple piece of cloth.

• Fold cardboard in a tube, fasten and cover with brown cloth.

• Cut the fabric into a heart shape; a heart-shape quiver folded in half is the original style.

• You can also make a quiver out of wood. Get a light type of wood in a cylinder shape, then put coals on it to turn the hole where you will put the arrows. All you need to do then is attach the string as mentioned above.

Thanks for submitting a tip for review!

Advertisement

• When making the slits in the quiver, make sure to position your hands so they don't get cut.

• If you are working on the wood version, be careful with coals when burning the centre of the wood.

• Don't allow the coals to fall off the wood and hit your hands. Try digging a small hole and putting one end of the wood into it for support.

• Be careful when sewing the quiver together so as not to prick your finger.

Advertisement

Things You'll Need

• fabric such as an old shirt or blanket or leather.
• wood (for second version of the quiver)
• string (two different pieces are recommended.)
• needle & thread (something to sew the quivers sides and bottom)
• knife or another cutting tool.
• coals (if you choose to make the wooden version of the quiver.)

About This Article

Thanks to all authors for creating a page that has been read 198,646 times.

Did this article help you?

Bow and Arrow With Quiver Hand Drawing

Source: https://www.wikihow.com/Make-a-Quiver-for-Arrows

Share this post